Description
EVK-ET-AM62
1, Description
This section briefly describes the performance parameters and target applications of the EVK-ET-AM62 single-board computer based on the TI AM623x/AM625x series CPU.
The SOM-ET-AM62 is a core board , based on the TI AM623x/AM625x series embedded CPU. It adopts a core board + baseboard design, with an ultra-small size of 50x40mm, complete interface design, and rich peripheral interfaces, facilitating users to directly integrate project development.
- The TI AM623x/AM625x is a collection of high-performance, ultra-efficient processors, which is the latest high-performance, low-power processor collection launched by TI. It adopts up to 4x ARM Cortex-A 53 cores, with a maximum operating speed of 1.4G Hz, and integrates a Cortex M4F MCU with a frequency of up to 400MHz and an R5F real-time processing unit. The TI AM623x/ AM625x application processors include an integrated power management module, reducing the complexity of external power supplies and simplifying power-up sequencing, and a graphics processor (AM625x) compliant with OpenGL ES3.1 and Vulkan 1.2, along with a PRU subsystem. At the same time, the AM62XX integrates a rich set of peripheral resources, depending on the positioning of the CPU sub-model, with up to 1 *LCD controller, 1* LVDS, 2 *RGMII, 2*OTG interfaces, 3* CAN -FD, 1 *CS interface, 3*SPI, 3*SDIO, 9*UART, 6*I2C, 5*SPI, 3*MCASP, 3*PWM, and 2x PRU subsystems.
The EVK-ET-AM62 is a high-cost performance, easy-to-use, and stable development kit . based on the interface characteristics and function definitions of the TI AM625x and AM623x series CPUs. The target application scenarios are as follows:
- IoT Gateway
- Human-Machine Interface
- Home Energy Management System
- Smart Energy Information Concentrator
- Smart Industrial Control System
- Electronic POS Equipment
- Medical Equipment
- Printers and 2D Scanners
2, Features
2.1 SOM-ET-AM62
Feature | Details |
SOM-ET-AM62 | |
CPU |
Up to 4x ARM Cortex-A 53, including:
• Up to 1400MHz • 32 KB L1 Instruction Cache • 32 KB L1 Data Cache • Single-core ARM Cortec-M4F up to 400MHz • Display Subsystem • 3D Graphics Processing Unit • One Camera Serial Interface • DDR Subsystem |
Memory and storage | |
DDR SDRAM |
• 2GB DDR 4 SDRAM (16-bit bus width)
• Maximum 4 GB support • 16 00MHz maximum DDR clock |
eMMC
|
• 8 GB eMMC flash memory Default
• 8-bits MMC mode • 4~ 128 GB storage option |
Connectivity | |
BTB | • 4x 60Pin BTB connector |
2.2 EVK-ET-AM62
Specification
Item | Description |
SoM Units | SoC:
Memory:
Storage:
|
Display | 1x HDMI
2x 4-lane lvds (Dual channel)
1x 16Bit RGB Parallel Display (Option) |
Camera | 1x MIPI CSI-2
|
Audio | 3.5mm Connector
|
Network | Ethernet:
1x M.2 E Key slot for WIFI/BT
M.2 Key B slot for 4G and 5G
|
USB | 2x USB2.0 host
|
I/O | 1x RS232
2x RS485 3x CANFD 1x I2C(Touch) 1x PWM(Backlight) 3x DIN 3x DO |
Expansion | 1xGPMC
2x 8Pins Header Compatible Mikroe Sensor Header |
System | 1x RTC (Battery)
4x LEDs 5x Button |
Electrical Mechanical | Power Supply: 12V/2A typical
Dimensions:189.9mm*125mm Weight:210g |
Environmental
|
Operation Temperature
Storage Temperature
Relative Humidity
|
Reliability | MTTF> 200,000 hours
Warranty of 5 years |
3,Packing List
- 1xEVK-ET-62X Carrier Board and SoM Board
- 1x12V 2A Power Supply
- 1xUSB C for debug